CRGO Silicon Steel Coil Strip CRNGO 50W470 CRNGO Cold Rolled Silicon Steel Non-Oriented Electrical Steel Coil

• After-sales Service: Allowable
• Warranty: 1 Year
• Type: Steel Coil
• Standard: ASTM, AISI, GB, JIS, DIN, BS
• Certification: ISO, RoHS
• Surface Treatment: Blackface
• Model NO.: 50W470 30Q120 23Q085
• Technique: Hot Rolled
• Application: Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate
• Special Use: Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel
• Stock: Stock
• Product Name: ASTM A36 Low Carbon Steel Sheet Plate
• Grade Standard: ASTM, JIS, GB, AISI, DIN, BS
• Technique Standard: Hot Rolled
• Usage: Transport, Construction, Shipbuilding, Gas Contain
• Customize: Hole, Checkered, According to Your Reque
• Package: Standard Export Packing
• Supplier Brand: Hbis, an Steel, Rizhao Steel, Baosteel, Lai Steel
• Payment 30% Tt Deposit Sample Free Type: Payment 30% Tt Deposit
• Delivery Time: 7-10 Working Days
• Width: 200-2000mm
• MOQ: 5 Tons
• Material: Q195/Q235/Q275 Q345 A572
• Coil Weight: 5-20 Tons
• Steel Type: Plate Strip Coil Sheet Plain Plate Plain Sheet
• Material Quality: Accept Third Party Inspection
• Transport Package: Export Package
• Specification: 1mm 2mm 3mm 6mm
• Trademark: zhuosheng
• Origin: China
• HS Code: 72091790
• Production Capacity: 5000000tons /Year

Product Description

CRGO 23Q085 23Q090 23QG110 CRNGO 50W600 50W470 Grain Oriented and Non-Oriented Cold Rolled B23R085 High magnetic sensing R series Alloy Silicon Steel Coil Strip



Product Description

Non-oriented electrical steel usually contains a level of 2%-3.5% silicon. It has similar magnetic properties in all directions, the so-called isotropy. Grain-oriented electrical steel usually contains a level of 3% silicon and is processed in a way to develop ideal properties in the rolling direction. Cold-rolled non-grain-oriented steel (CRNGO) is less expensive than cold-rolled grain-oriented steel (CRGO). CRNGO can be used in cost-oriented applications with the inconstant direction of magnetic flux, such as electric motors and generators. CRGO is usually in coil form and has to be cut into laminations further, being used in transformer core applications, such as certain internal parts in audio output transformers

 

What is Silicon steel coil ?

Non-oriented electrical steel usually contains a level of 2%-3.5% silicon. It has similar magnetic properties in all directions, the so-called isotropy. Grain-oriented electrical steel usually contains a level of 3% silicon and is processed in a way to develop ideal properties in the rolling direction. Cold-rolled non-grain-oriented steel (CRNGO) is less expensive than cold-rolled grain-oriented steel (CRGO). CRNGO can be used in cost-oriented applications with the inconstant direction of magnetic flux, such as electric motors and generators. CRGO is usually in coil form and has to be cut into laminations further, being used in transformer core applications, such as certain internal parts in audio output transformers . 

SiliconSteel 50AW530

Silicon steel scrap/Silicon steel coil/Silicon steel sheet/Silicon steel/Silicon steel plate/Silicon steel/Cold-rolled non grain oriented silicon steel coil/Silicon Steel 50AW530/Silicon coil/SILICON STEEL COIL

Shandong Zhuosheng STEEL CO.,LTD, The professional supplier of carbon steel, stainless steel, profile steel ,  GI, GL,PPGI, PPGI/PPGL, SILICON STEEL COIL,HRC,CRC. Marine steel sheet ,plate , angle steel ,  H beam ,I beam ,C channel, U channel  etc . 

Electrical steel is mainly divided into GO electrical steel and NGO electrical steel two categories.Easy magnetization direction of GO electrical steel distribution along the rolling direction, the direction of rolling with high induction, excellent characteristics such as low iron loss and low magnetostriction, while the magnetic domain refinement processing technology, lower iron loss of performance, and are widely used in the transformer industry.

CRNGO 50W600 Grain Oriented and Non-Oriented Cold Rolled Low Alloy Silicon Steel Coil

Product Specification and Steel Grade (For Reference)

Standard : AISI , ASTM,BS, DIN, GB,JIS 

Grade :  35W250   35W270  35W300 .  50W470  50W600   etc.

 

1.Grain-Oriented Electrical Steel

Thickness:0.23mm,0.27mm,0.30mm,0.35mm

Width: 900-1200mm

Inner Diameter: 508mm

2.Non-Oriented Electrical Steel

Thickness:0.20mm,0.35mm,0.50mm,0.65mm

Width: 800-1250mm

Inner Diameter: 508mm

 

Standard Size

Thickness	Width	Slitting	Inside Diameter	Outside Diameter
0.35mm, 0.50mm, 0.65mm	Original: 750~1290mm	40~645mm	508~610mm	800~1550mm

IEC 404-8-4 (1986)	EN 10106 (1995)	AISI	ASTM A677 (1989)	JIS 2552 (1986)	GOST 21427 0-75
-	M235-50A	-	-	-	-
250-35-A5	M250-35A	M 15	36F145	35A250	2413
270-35-A5	M270-35A	M 19	36F158	35A270	2412
300-35-A5	M300-35A	M 22	36F168	35A300	2411
330-35-A5	M330-35A	M 36	36F190	-	-
-	M250-50A	-	-	-	-
270-50-A5	M270-50A	-	-	50A270	-
290-50-A5	M290-50A	M 15	47F168	50A290	2413
310-50-A5	M310-50A	M 19	47F174	50A310	2412
330-50-A5	M330-50A	M 27	47F190	-	-
350-50-A5	M350-50A	M 36	47F205	50A350	2411
400-50-A5	M400-50A	M 43	47F230	50A400	2312
470-50-A5	M470-50A	-	47F280	50A470	2311
530-50-A5	M530-50A	M 45	47F305	-	2212
600-50-A5	M600-50A	-	-	50A600	2112
700-50-A5	M700-50A	M 47	47F400	50A700	-
800-50-A5	M800-50A	-	47F450	50A800	2111
-	M940-50A	-	-	-	-
-	M310-65A	-	-	-	-
-	M330-65A	-	-	-	-
350-65-A5	M350-65A	M 19	64F208	-	-
400-65-A5	M400-65A	M 27	64F225	-	-
470-65-A5	M470-65A	M 43	64F270	-	-
530-65-A5	M530-65A	-	-	-	2312
600-65-A5	M600-65A	M 45	64F360	-	2212
700-65-A5	M700-65A	-	64F400	-	2211
800-65-A5	M800-65A	-	-	65A800	2112
-	-	M 47	64F500	-	-
1000-65-A5	M1000-65A	-	64F550	65A1000	-

 

 

Making and using non-oriented silicon steels

Non-oriented silicon steels do not use a secondary recrystallization process to develop their properties, and high temperature annealing is not essential. Therefore, a lower limit on silicon, such as is required for the oriented grades, is not essential.

Non-oriented grades contain between 0.5 and 3.25% Si plus up to 0.5% Al, added to increase resistivity and lower the temperature of primary recrystallization. Grain growth is very desirable in the nonoriented grades, but is generally much smaller than for the oriented grades.

Processing to hot rolled band is similar to that described for the oriented grade. After surface conditioning, the bands are usually cold rolled directly to final gage, and sold to the transformer manufacturer in one of two conditions - fully-processed, or semi processed. After final cold rolling, the strip is annealed, decarburizing it to 0.005% C or lower and developing the grain structure needed for the magnetic properties. Samples are then taken from each coil end, and tested.

Fully processed nonoriented silicon steels are generally used in applications in which:

 

• Quantities are too small to warrant stress relieving by the consumer, or
• Laminations are so large that good physical shape would be difficult to maintain after an 843°C stress relief anneal.

Non-oriented steels are not as sensitive to strain as the oriented product. Consequently, shearing strains constitute the only strain effects, which should degrade the magnetic quality. Because laminations are generally large, these shearing strains can be tolerated. Most of the fully processed grades are used as stamped laminations in such applications as rotors and stators.

The non-oriented steels have a random orientation. They are commonly used in large rotating equipment, including motors, power generators, and AC alternators. Fully processed steels are given a "full" strand anneal (to develop the optimum magnetic quality), making them softer and more difficult to punch than semi-processed products. Grades with higher alloy content are harder and thus easier to punch.

Structural steel plate: 

It is mainly used for the production of steel structures, bridges, ships and vehicles.
Weathering steel plate: 

The addition of special elements (P, Cu, C, etc.) has good corrosion resistance and atmospheric corrosion resistance, and is used in the production of containers, special vehicles, and also for building structures.
Hot rolled special steel plate: 

Carbon steel, alloy steel and tool steel for general mechanical structure are used in the production of various mechanical parts after heat treatment engineering.
Steel plate for steel tube: 

It has good processing performance and compressive strength, and can be used to produce high pressure gas pressure vessels with contents less than 500L filled with LPG, acetylene and various gases.

 

Detailed Photos

 

Company Profile

Shandong Zhuosheng Steel Co.,Ltd  is a large-scale iron and steel enterprise integrating iron and steel production, processing, distribution and trade. The comprehensive strength has jumped to the forefront of the domestic steel industry.

Zhuosheng Steel is committed to the research and development, production and processing of carbon steel and profiles and pipes, with strong research and development strength and reliable quality assurance capabilities. Products are suitable for nuclear power, aviation, marine engineering, oil exploration, construction and other fields. The comprehensive annual production capacity is 500,000 tons, and the products are exported to more than 100 countries and regions.

Zhuosheng Steel mainly produces steel pipes, angle steels, I-beams, steel bars, steel plates, steel coils, etc. Since the establishment of the company, product quality has always been regarded as the foundation of the enterprise, and service quality has been regarded as a bridge of communication. We sincerely hope to establish business with customers from all over the world. We insist on providing high-quality services, "pragmatic, development, innovation", entrepreneurship and integrity are our company's business purposes.

Application:

Steel plate applies to construction field, ships building industry, petroleum,chemical industries, war and electricity industries, food processing and medical industry, boiler heat exchanger, machinery and hardware fields,etc.
 

 

 

Packaging & Shipping



Our Advantages  and Certification : 



1. who are we?
We are based in Shandong Province, China, start from 2011,sell  carbon steel coil , carbon steel pipe , carbon steel sheet and rod , stainless steel sheet , pipe rod,  steel  wire and coil , galvanized steel pipe , rod,  coil and GI Sheet  to South America(10.00%),South east Asia(20.00%), Africa(20.00%),South Asia(10.00%),Mid East(30.00%),North America(10.00%). There are total about 101-200 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;  the third 

party testing is allowed

  .
we have get the ISO and CE certification . 

3.what can you buy from us?

carbon steel and stainless steel and galvanized steel , SUPER GALUMSGLCSGCDUNILUME , SGLD  , color bond  Hot-Dip  Al-Zn Alloy-Coated Steel SheetAl-Zn alloy coated steel ,  PPGL  ,Steel Plate, Roofing Sheet,PPGI,Galvalume Steel,Galvanized Steel  ETC.

4. why should you buy from us not from other suppliers?
Shandong Zhuosheng Steel Co.,Ltd belongs to Zhuosheng Group. There are 16 branch companies in our group, including 5 foreign trade companies, 12 domestic trade companies and one steel factory. We can supply all kinds of steel one-stop shop, welcome contact!

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,Western Union,Cash;
Language Spoken:English,Chinese,Spanish .