| Customization: | Available |
|---|---|
| Type: | Stainless Steel Coils |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of US$ 15/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Thickness | 0.3-200mm |
| Length: | 2000mm, 2438mm, 3000mm, 5800mm, 6000mm,12000mm, etc |
| Width: | 40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Standard: | ASTM,AISI,JIS,GB, DIN,EN |
| Surface: | BA,2B,NO.1,NO.4,12K,HL,8K |
| Application: | It is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components.It also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc. |
| Certification: | ISO, SGS,BV |
| Technique: | Cold Rolled Hot Rolled |
| Edge: | Mill Edge Slit Edge |
| Grade (ASTM UNS) | Mill Edge Slit Edge |
| Chemical Composition | ||||||||||
| The typical chemical composition is shown in the table below. | ||||||||||
| Grade | Standard | 304 Chemical Composition | ||||||||
| C | Si | Mn | Cr | Ni | P | S | Mo | Others | ||
| ≤ % | ≤ % | % | % | % | ≤ % | ≤ % | ≤ % | % | ||
| 304 | ASTM A240 | 0.08 | 0.75 | 2 | 18.0 - 20.0 | 8.0 - 10.5 | 0.045 | 0.03 | - | N≤ 0.10 |
| 1.4301 | EN 10088-2 | 0.07 | 1 | 2 | 17.0 - 19.5 | 8.0 - 10.5 | 0.045 | 0.015 | - | N≤ 0.11 |
| SUS304 | JIS G 4304 | JIS G 4305 | 0.08 | 1 | 2 | 18.0 - 20.0 | 8.0 - 10.5 | 0.045 | 0.03 | - | - |
| Mechanical Properties | ||||||
| The mechanical properties are given in the table below. | ||||||
| Grade | Standard | 304 Mechanical Properties | ||||
| Tensile Strength | Yield Strength 0.2% | Elongation >% | Hardness | |||
| (MPa) ≥ | (MPa) ≥ | HRB ≤ | HB ≤ | |||
| 304 | ASTM A240 | 515 | 205 | 40 | 92 | 201 |
| 1.4301 | EN 10088-2 | 520 | 210 | 45 | 90 | 215 |
| SUS304 | JIS G 4304 JIS G 4305 |
520 | 205 | 40 | 90 | 187 |
| 304 stainless steel is a common material in stainless steel, with a density of 7.93 g/cm3, which is also called 18/8 stainless steel in the industry. |
| High temperature resistant to 800°C and processability. Common labeling methods on the market include 0Cr18Ni9 and SUS304. Among them, 0Cr18Ni9 generally means national standard production, and 304 generally means ASTM standard production. |
| Surface options | ||||
| Grade | GB/T | ASTM | JIS | EN |
| No.1 | 1D | No.1 | No.1 | 2D |
| No.2D | 2D | No.2D | No.2D | 2D |
| No.2B | 2B | No.2B | No.2B | 2B |
| BA(6K) | BA | BA | BA | 2R |
| No.3 | 3# | No.3 | No.3 | 2G |
| No.4 | 4# | No.4 | No.4 | 2G |
| #240 | 6# | No.6 | 240# | 2J |
| #320 | 7# | No.7 | 320# | 2K |
| #400 | 8# | No.8 | 400# | 2P |
| HL | HL | - | HL | - |
| 8K Mirror Finish | 8K | 8K | 8K | 8K |
| Fine 8K Mirror Finish | Fine 8K | Fine 8K | Fine 8K | Fine 8K |
| Titanize | Titanize | Titanize | Titanize | Titanize |
| Etching Finish | Etch | Etch | Etch | Etch |
| Fingerprint Resistant | AF | AF | AF | AF |
Production details
| Surface | Characteristic | Summary of Manufacturing Method | Application |
| NO.1 | Silvery white | Hot rolled to specified thickness | Do not need to have a glossy surface use |
| NO.2D | Silvery white | After cold rolling, heat treatment and pickling are carried out | General material, deep material |
| NO.2B | Gloss is stronger than No.2D | After No.2D treatment, the final light cold rolling is carried out through the polishing roller | The general material |
| BA | As bright as a sixpence | No standard, but usually a bright annealed surface with high reflectivity. | Building materials, kitchen utensils |
| NO.3 | Rough lapping | Grind with 100~200# (unit) strop tape | Building materials, kitchen utensils |
| NO.4 | Intermediate grinding | Polished surface obtained by grinding with 150~180# strop abrasive tape | Building materials, kitchen utensils |
| NO.240 | Fine lapping | Grinding with 240# strop abrasive tape | kitchenware |
| NO.320 | Very fine grinding | Grinding was carried out with 320# strop abrasive tape | kitchenware |
| NO.400 | The luster is close to BA | Use 400# polishing wheel to grind | General timber, building timber, kitchen appliances |
| HL | Hairline grinding | Suitable particle material for hair stripe grinding (150~240#) with many grains | Building, construction material |
| NO.7 | It's close to mirror grinding | Use a 600# rotary polishing wheel to grind | For art or decoration |
| NO.8 | Mirror ultrafinish | The mirror is ground with a polishing wheel | Reflector, for decoration |
Shandong Zhuosheng Steel Co.,Ltd is a large-scale iron and steel enterprise integrating iron and steel production, processing, distribution and trade. The comprehensive strength has jumped to the forefront of the domestic steel industry.
Zhuosheng Steel is committed to the research and development, production and processing of carbon steel and profiles and pipes, with strong research and development strength and reliable quality assurance capabilities. Products are suitable for nuclear power, aviation, marine engineering, oil exploration, construction and other fields. The comprehensive annual production capacity is 500,000 tons, and the products are exported to more than 100 countries and regions.
Zhuosheng Steel mainly produces steel pipes, angle steels, I-beams, steel bars, steel plates, steel coils, etc. Since the establishment of the company, product quality has always been regarded as the foundation of the enterprise, and service quality has been regarded as a bridge of communication. We sincerely hope to establish business with customers from all over the world. We insist on providing high-quality services, "pragmatic, development, innovation", entrepreneurship and integrity are our company's business purposes.
Applications Typical applications include:
• Aircraft exhaust manifolds
• Expansion joints
• Bellows
• Furnace parts
• Heating element tubing
• Heat Exchangers
• Woven or welded screens for high temperature mineral processing
• Spiral Welded tube for burner pipes and flues
Our advantage
Packing and shipping
FAQ
){kind=link}